FOR US, SAFETY OF ABRASIVES COMES FIRST, LAST AND ALWAYS
All Weiler Abrasives products are made to the strictest quality standards and specifications and designed to provide superior work performance and safe operation when used correctly.
Many manufacturers directly mark some safety warnings, recommendations, and usage restrictions on the product. However, it is not always practical to include even the most limited safety information on the product itself. Users must READ and FOLLOW all instructions. They are provided in the product box and those marked on the product.
Weiler Abrasives is a proud member of FEPA and OSA organizations.
Safety slips
wEILER abrasives safety videos
SAFETY ICONS & PERSONAL PROTECTION
Read Warnings: Failure to observe safety precautions may result in injury.
Safety Goggles / Face Shield: Safety goggles or full face shields worn over safety glasses with side shields must be worn by all operators and others in the area of brush and abrasive operations.
Protective Clothing: Appropriate protective clothing must be used where there is a possibility of injury that can be prevented by such clothing.
Hearing Protection: Use of these products may create elevated sound levels. Hearing protection must be worn where required.
Safety Gloves: Grinding applications are conducted in harsh environments. The use of safety gloves is recommended.
Respiratory Protection: Wear respiratory protection against dust and fumes.
Tool Guard: Guards must be kept in place at all times when the product is running.
TOOL/WORK REST
On bench grinders, tool/work rests should be used to support the workpiece. It should have a maximum opening of 1/8" to the product face. Only adjust the rest when the product is not in motion.
BEFORE STARTING PRODUCT
Use eye protection and safety equipment. Inspect product for rust, damage, etc. If the RPM marked on the power tool is higher than the RPM marked on the product, do not mount the product onto the device.
AND DON'T FORGET
Inspect and jog the machine to ensure that the product is mounted correctly and securely; machine guards are in place, no vibration, etc. Run the engine at operating speed for at least one minute before applying for work. Do not stand in front of or in line with the product.
CONFORMING TO KEY INTERNATIONAL SAFETY STANDARDS
- EN 12413: Safety requirements for Bonded abrasive products
- EN 13743: Safety requirements for Coated abrasive products
- EN 13236: Safety requirements for Superabrasive products
- EN 1083-2: Safety requirements for power-driven brushes
- ANSI B165.1: Power Tools - Power-Driven Brushing Tools - Safety Requirements for Design, Care and Use
- ANSI B7.1: Safety Requirements - For the Use, Care and Protection of Abrasive Wheels
- oSa requirements
VALUE ADDED PROGRAMS
The SPOT Safety Program educates people on how to use abrasives and power brushes safely and properly. The program includes information regarding correct use, potential hazards, and safety tips.